Changeover switch for LPG/CNG Cars(K722)
The switch code K722 is to be used on cars with electronic
reduction-unit carburetor; It can be re-programmed and can be set
up with SAFETY-CAR PLUS FILLING AND TANK EMPTY or ONLY TANK EMPTY
with different types of sensor (AEB., 0· 4700 Ohm, 0· 90 Ohm,
RESERVE) and with the adjustment of the priming time.
To avoid any switch malfunctions we recommend to:
Lay the switch wires as far as possible from the high-voltage
Carry out some good electrical connections by avoiding the use of
"power reducers". Keep in mind that the best electrical connection
is a duly insulated welding.
We recommend not to replace the 5 A fuse with higher amperage fuses
not conforming to the DIN 72851 standard, as this could cause
Do not open for any reason the switch box, mainly with running
engine or switch -on panel.
Power voltage 10· 14V DC
Rated GAS output current (BLUE wire) 5A max
Rated GASOLINE output current (YELLOW wire) 5A max
DIN 72581 standard fuse 5A max
Overall dimensions of the switch box Height 20mm
The product conforms to the following standards: Rule R 67/01
Rule R 10/02
Changeover Switch for LPG/CNG Cars (K722) Images